1、A voltmeter connected across A to B would read 10 volts
兩點間的電壓表的讀數應為10伏。

2、A voltmeter connected across A to B would read 10 volts.
兩點間的電壓表的讀數應為10伏。

3、a sensitive voltmeter that can measure voltage in millivolts
能夠以毫伏計量的靈敏伏特計。

4、Test points can included to accommodate voltmeter or oscilloscope probes.
測試點可容納包括電壓表或示波器探頭。

5、R. M. S.Value Error for Selective Voltmeter in Measuring FM Signal
選頻電壓表在測量調頻信號時的有效值誤差

6、a voltmeter whose sensitivity is increased by amplification
靈敏度由于擴大而增強的伏特計。

7、The circuit of the electrometer when used as a voltmeter is actually as shown in Figure 2-6.
當靜電計作為電壓表使用時，其電路實際上如圖2 - 6所示。

8、Therefore, a voltmeter with high input resistance, such as an electrometer, is required.
所以需要使用具有高輸入電阻的電壓表，例如靜電計。

9、The voltmeter leads are placed a known distance apart.
電壓表的引線則按已知的距離放置。

10、A voltmeter whose sensitivity is increased by amplification.
靈敏度由于擴大而增強的伏特計。

11、A steady-state DC signal applied to a voltmeter presents no conceptual difficulty.
理解穩態直流信號加到電壓表上的情況在概念上沒有什么困難。

12、To monitor the output voltage, a voltmeter is connected in parallel with the load resistance.
為了監測輸出電壓，將一個伏特計與負載電阻并聯在一起。

13、An electronic voltmeter that gives readings in digits.
能夠以數字顯示的電伏特計。

14、Suppose we connect a voltmeter across a dry cell.
假定我們在干電池兩端接上伏特計。

15、The voltmeter is an electrical instrument for measurement of voltage.
伏特計是用來測量電壓的儀表。

16、The three-pole switch was originally used to switch a voltmeter guard along with the signal lines.
三刀開關最早用于切換伏特計保護及信號線路。

17、Using a voltmeter measure fused ign sw output ckt at the red conn.
用伏特表測量紅色接頭處的熔斷點火裝置開關輸出電路。

voltmeter翻譯