1、Sending data correctly isn't enough.
正確地發送數據還不夠。

2、Therefore, each partition is sending data to all other partitions, while leaving some data behind.
因此，每個分區都將數據發送到所有其他分區，同時留有部分數據。

3、Sending data from slave to master may use the opposite clock edge as master to slave.
數據從主機發給從機可能會使用與從機發給主機相反的時鐘沿。

4、User Datagram protocol is a protocol for sending data on an IP-network.
用戶數據報協議(udp)是一個ip網絡協議發送數據。

5、Sending data through POST requires three steps.
通過POST發送數據要求三個步驟。

sending data翻譯