1、Reinforce to patrol vessel and measure the liquid tank and bilge water well frequently.
加強全船巡視檢查，勤測各液體艙及污水溝等。

2、Start the bilge water feed pump, check the feed water solenoid valve and flow switch.
啟動艙底水供給泵，檢查補水電磁閥和流量開關是否工作。

3、Pump bilge water into bilge tank.
先將污水泵入污水柜。

4、Say no bilge water about the mater.
在這個問題上別說廢話。

5、Bilge water separator drainage tank high level alarm.
艙底水油分離器泄放柜高位報警。

6、Bilge water discharge forbidden when mooring at anchorage or in harbour basin.
停泊在錨地、港池內的船舶，禁止向舷外排放污水。

7、Then pump bilge water into oily water separator.
再泵入油水分離器。